-
Crankshaft
The crankshaft is made of high-strength alloy material 42CrMo, while other general manufacturers use 45 steel material for the crankshaft. Advantages: The strength is 1.3 times higher than that of 45 steel, and the service life is longer. The probability of crankshaft fr...Read more -
Slide Guide
The slider guide rail is treated with "high-frequency quenching" and "guide rail grinding process". High frequency quenching: The hardness reaches HRC48 degrees or above. Guide rail grinding process: The surface smoothness can reach a mirror level Ra0.4, and the flatness...Read more -
Electric Control
Adopting world-renowned high-end brand electronic components, the electrical control system operates safely, reliably, stably, has a long lifespan, reduces failure rates, and is conducive to maintenance.Read more -
Lubrication Piping
QIAOSEN standard machine C frame single and double crank punch press, standard oil pressure lubrication piping is used Φ 6 (Generally used by other manufacturers) Φ 4) The hydraulic lubrication piping of medium and large punch presses adopts Φ 8. Advantages: The pipeline...Read more -
Static Balance Instrument
Flywheel static balance testing platform, each flywheel undergoes a static balance test to ensure that the flywheel operates at high speed and reduces the shaking of the press.Read more -
Lantern Ring
The area where the collar comes into contact with the oil seal is processed through "surface grinding" and "surface chromium plating (Cr)" processes. Advantages: The surface smoothness reaches Ra0.4~Ra0.8, and it is not easy to leak oil when in contact with the oil seal....Read more -
Copper Sleeve
All copper sleeves of the QIAOSEN press machine are made of tin phosphorus bronze ZQSn10-1, and general manufacturers use BC6 (ZQSn 6-6-3) copper material. Advantages: The strength is 1.5 times higher than ordinary BC6 copper, with high strength, low wear, and long accur...Read more -
Ball Seat
Ball seat material: sintered TM-3 copper alloy ball seat, other general manufacturers' ball seats are made of ductile iron. Advantages: High strength TM-3 alloy ball seat, with a surface compressive strength of up to 1000kgf/cm ²， During the stamping process, the fricti...Read more -
Gear Shaft
The gear shaft is made of high-strength alloy material 42CrMo, and all tooth surfaces have been quenched by intermediate frequency, resulting in high hardness; Tooth surface grinding processing with high accuracy. Advantages: Low tooth wear, high meshing accuracy, and lo...Read more -
Structure And Characteristics Of Pneumatic Mechanical Press
Pneumatic mechanical press machine structure What is a pneumatic mechanical press? Pneumatic press is a high-speed stamping equipment that uses a compressor to generate gas with high punching accuracy and fast speed. Compared with ordinary presses, pneumatic presses adopt advanced photoelectric p...Read more -
Safety Technical Measures and Maintenance Method of Precision Press Machine
Precision press machine Hand safety tools. Using hand safety tools can avoid accidents caused by improper design of stamping molds and sudden equipment failures. Common safety tools include elastic pliers, specialized pliers, magnetic suction cups, forceps, pliers, hooks, etc. Protective measures...Read more -
Characteristics of Pneumatic Mechanical Presses
The braking method of the pneumatic mechanical press is a pneumatic clutch, which is mainly used for stamping power. It comes from the electric motor driving the flywheel, which drives the crankshaft and generates impulse. Ordinary press machines use traditional braking methods, commonly known as...Read more
- sales@qiaosenpresses.com
- (+86)13912385170