• facebook
  • linkedin
  • instagram
  • youtube

PRESS BUILDER

PROVIDE PROFESSIONAL METALFORMING SOLUTIONS

315 Ton C Frame Single Crank Press Machine

Short Description:

ST series presses is Gap Frame single crank press designed for stamping applications but with high performance outputs. It is widely used in stamping of hardware, Automobile parts and electronic components.

ST-315 presses are single point press machine produced by Qiaosen presses, which built to meet or exceed JIS Class 1 accuracy standards. The tonnage is 315 ton, suitable for stamping some small components. There are 3 operating modes for the press: “Continuous”, “Single”, and “Inch”. It can link servo feeders and automated robots.

315 ton mechanical press machine can be used for the processing requirements of punching, forming, forging, bending, deep drawing, and other processes.

Qiaosen adopt high strength steel frames and Quenching & Grinding Process for Slide-Guide,which can make the press machine have minimizing deflection and high accuracy and provide increased tool life.


Product Detail

Features

Standard / Optional

VIEW VIDEOS

Specifications

Features

● Heavy one-piece steel frame, minimizing deflection, high accuracy.

● OMPI pneumatic dry clutch brake,longer service life.

● 6 points slide guiding, Adopt Quenching & Grinding Process for Slide-Guide,which can make the press machine higher accuracy & low wear and provide increased tool life.

● Forged 42CrMo alloy material crankshaft, its strength is 1.3 times higher than that of #45 steel, and service life is longer.

● Copper sleeve is made of tin phosphorus bronze ZQSn10-1, which has a strength 1.5 times higher than that of ordinary BC6 brass.

● Highly sensitive hydraulic overload protection device,effectively protect the service life of the presses and tools.

● Built to JIS Class I accuracy standard.

● Optional Die Cushion.

315ton presses
c frame 315 ton mechanical press machine

Specifications

Technical parameter

Specifications Unit ST-315
Mode   V-type H-type
Press capacity Ton 315
Rated tonnage point mm 7 3.5
Slide strokes per minute S.P.M 20~40 40~50
Slide stroke length mm 250 150
Max die height mm 520 570
Slide adjustment amount mm 120
Slide size mm 1300*750*100
Bolster size mm 1600*840*180
Slide center to machine distance mm 430
Platform to floor distance mm 1030
Shank hole mm Φ65
Main motor power KW*P 30*4
slide adjust device / Electric
Air pressure kg*cm² 6
Press accuracy grade Grade JIS 1
Press dimension(L*W*H) mm 2780*1870*4470
Press weight Tons 34
Die cushion capacity Ton 14
Die cushion stroke mm 100
Die cushion active area mm² 810*480
NOTE:Our company is ready to carry out research and improvement work at any time. Therefore, the size design characteristics specified in this catalogue can be changed without further notice. (If the slider is selected for electric mold adjustment, the parameter will be reduced by 10 mm)

 

Standard Configuration

> Hydraulic overload protection device
> Manual slider adjustment device (below ST60)
> Electric slider adjusting device (above ST80)
> Variable frequency variable speed motor (adjustable speed)
> Mechanical die height indicator (below ST60)
> Digital die height indicator (above ST80)
> Slider and stamping tools balance device
> Rotating cam controller
> Crankshaft angle indicator
> Electromagnetic counter
> Air source connector
> Second degree falling protecting device
> Air blowing device
> Mechanical shockproof feet
> Mis-feeding detection device reserved interface
> Maintenance tools and toolbox
> Main motor reversing device
> Light Curtain (Safety Guarding)
> Power outlet
> Electric grease lubrication device
> Touch screen (pre-break, pre-load)
> Fixed two-handed operating console
> LED die lighting

Optional Configuration

> Customization Per Customer Requirement
> Die Cushion
> ST-60 die height electric adjusting device
> Quick Die Change System
> Slide knock out device
> Turnkey System with Coil Feedline and Automation System
> T-type movable two handed console
> Re-Circulating Oil lubrication(Above ST-80)
> Wet clutch
> Anti-Vibration Isolator
> Tonnage Monitor

  • Previous:
  • Next:

  • ● Heavy one-piece steel frame,minimizing deflection,high accuracy.

    ● OMPI pneumatic dry clutch brake,longer service life.

    ● 6 points slide guiding,Adopt Quenching&Grinding Process for Slide-Guide,which can make the press machine higher accuracy & low wear and provide increased tool life.

    ● Forged 42CrMo alloy meaterial crankshaft, its strength is 1.3 times higher than that of #45 steel, and service life is longer.

    ● Copper sleeve is made of tin phosphorus bronze ZQSn10-1, which has a strength 1.5 times higher than that of ordinary BC6 brass.

    ● Highly sensitive hydraulic overload protection device,effectively protect the service life of the presses and tools.

    ● Built to JIS Class I accuracy standard.

    ● Optional Die Cushion.

    Standard Confirguration

    > Hydraulic overload protection device > Air blowing device
    > Manual slider adjustment device (below ST60) > Mechanical shockproof feet
    > Electric slider adjusting device (above ST80) > Mis-feeding detection device reserved interface
    > Variable frequency variable speed motor (adjustable speed) > Maintenance tools and toolbox
    > Mechanical die height indicator (below ST60) > Main motor reversing device
    > Digital die height indicator (above ST80) > Light Curtain (Safety Guarding)
    > Slider and stamping tools balance device > Power outlet
    > Rotating cam controller > Electric grease lubrication device
    > Crankshaft angle indicator > Touch screen (pre-break, pre-load)
    > Electromagnetic counter > Fixed two-handed operating console
    > Air source connector > LED die lighting
    > Second degree falling protecting device    

    Optional Configuration

    > Customization Per Customer Requirement > T-type movable two handed console
    > Die Cushion > Re-Circulating Oil lubrication(Above ST-80)
    > ST-60 die height electric adjusting device > Wet clutch
    > Quick Die Change System > Anti-Vibration Isolator
    > Slide knock out device > Tonnage Monitor
    > Turnkey System with Coil Feedline and Automation System