• facebook
  • linkedin
  • instagram
  • youtube

PRESS BUILDER

PROVIDE PROFESSIONAL METALFORMING SOLUTIONS

45 Ton C Frame Single Crank Press Machine

Short Description:

ST series presses is C Frame single crank press designed for small stamping applications but with high performance outputs. It is widely used in stamping of hardware and electronic components.

ST-45 presses are produced by Qiaosen presses, which built to meet or exceed JIS Class 1 accuracy standards. The tonnage is 45 ton, suitable for stamping some small components. There are 3 operating modes for the press: “Continuous”, “Single”, and “Inch”. It can link servo feeders and automated robots.

Qiaosen adopt high strength steel frames and Quenching & Grinding Process for Slide-Guide,which can make the press machine have minimizing deflection and high accuracy and provide increased tool life.


Product Detail

Features

Standard / Optional

VIEW VIDEOS

Specifications

Features

● Heavy one-piece steel frame, minimizing deflection, high accuracy.

● OMPI pneumatic dry clutch brake,longer service life.

● 6 points slide guiding, Adopt Quenching & Grinding Process for Slide-Guide,which can make the press machine higher accuracy & low wear and provide increased tool life.

● Forged 42CrMo alloy material crankshaft, its strength is 1.3 times higher than that of #45 steel, and service life is longer.

● Copper sleeve is made of tin phosphorus bronze ZQSn10-1, which has a strength 1.5 times higher than that of ordinary BC6 brass.

● Highly sensitive hydraulic overload protection device,effectively protect the service life of the presses and tools.

● Built to JIS Class I accuracy standard.

● Optional Die Cushion.

45ton mechanical press machine
45T press machine
45 ton punch machine

Specifications

Technical parameter

Specifications Unit ST-45
Mode   V-type H-type
Press capacity Ton 45
Rated tonnage point mm 3.2 1.6
Slide strokes per minute S.P.M 40~100 110~150
Slide stroke length mm 80 50
Max die height mm 250 265
Slide adjustment amount mm 60
Slide size mm 560*340*60
Bolster size mm 850*440*80
Slide center to machine distance mm 225
Platform to floor distance mm 790
Shank hole mm Φ38.1
Main motor power KW*P 5.5*4
slide adjust device / Manual
Air pressure kg*cm² 6
Press accuracy grade Grade JIS 1
Press dimension(L*W*H) mm 1575*950*2500
Press weight Tons 3.8
Die cushion capacity Ton 2.3
Die cushion stroke mm 50
Die cushion active area mm² 300*230
NOTE:Our company is ready to carry out research and improvement work at any time. Therefore, the size design characteristics specified in this catalogue can be changed without further notice. (If the slide is selected for electric mold adjustment, the parameter will be reduced by 10 mm)

 

Standard Configuration

> Hydraulic overload protection device
> Manual slider adjustment device (below ST60)
> Electric slider adjusting device (above ST80)
> Variable frequency variable speed motor (adjustable speed)
> Mechanical die height indicator (below ST60)
> Digital die height indicator (above ST80)
> Slider and stamping tools balance device
> Rotating cam controller
> Crankshaft angle indicator
> Electromagnetic counter
> Air source connector
> Second degree falling protecting device
> Air blowing device
> Mechanical shockproof feet
> Mis-feeding detection device reserved interface
> Maintenance tools and toolbox
> Main motor reversing device
> Light Curtain (Safety Guarding)
> Power outlet
> Electric grease lubrication device
> Touch screen (pre-break, pre-load)
> Fixed two-handed operating console
> LED die lighting

Optional Configuration

> Customization Per Customer Requirement
> Die Cushion
> ST-60 die height electric adjusting device
> Quick Die Change System
> Slide knock out device
> Turnkey System with Coil Feedline and Automation System
> T-type movable two handed console
> Re-Circulating Oil lubrication(Above ST-80)
> Wet clutch
> Anti-Vibration Isolator
> Tonnage Monitor

  • Previous:
  • Next:

  • ● Heavy one-piece steel frame,minimizing deflection,high accuracy.

    ● OMPI pneumatic dry clutch brake,longer service life.

    ● 6 points slide guiding,Adopt Quenching&Grinding Process for Slide-Guide,which can make the press machine higher accuracy & low wear and provide increased tool life.

    ● Forged 42CrMo alloy meaterial crankshaft, its strength is 1.3 times higher than that of #45 steel, and service life is longer.

    ● Copper sleeve is made of tin phosphorus bronze ZQSn10-1, which has a strength 1.5 times higher than that of ordinary BC6 brass.

    ● Highly sensitive hydraulic overload protection device,effectively protect the service life of the presses and tools.

    ● Built to JIS Class I accuracy standard.

    ● Optional Die Cushion.

    Standard Confirguration

    > Hydraulic overload protection device > Air blowing device
    > Manual slider adjustment device (below ST60) > Mechanical shockproof feet
    > Electric slider adjusting device (above ST80) > Mis-feeding detection device reserved interface
    > Variable frequency variable speed motor (adjustable speed) > Maintenance tools and toolbox
    > Mechanical die height indicator (below ST60) > Main motor reversing device
    > Digital die height indicator (above ST80) > Light Curtain (Safety Guarding)
    > Slider and stamping tools balance device > Power outlet
    > Rotating cam controller > Electric grease lubrication device
    > Crankshaft angle indicator > Touch screen (pre-break, pre-load)
    > Electromagnetic counter > Fixed two-handed operating console
    > Air source connector > LED die lighting
    > Second degree falling protecting device    

    Optional Configuration

    > Customization Per Customer Requirement > T-type movable two handed console
    > Die Cushion > Re-Circulating Oil lubrication(Above ST-80)
    > ST-60 die height electric adjusting device > Wet clutch
    > Quick Die Change System > Anti-Vibration Isolator
    > Slide knock out device > Tonnage Monitor
    > Turnkey System with Coil Feedline and Automation System